This is part 2 of the Free Form Wired Bangle Tutorial:
Step 5:
Wrap the wires around 4 times. Cut off excess wires. You have completed the 1st joint for the bangle.
Step 6:
Thread in a 1.5cm of round bead into the wire numbered 3.
Step 7:
Pull it nearer to the 1st joint.
Step 8:
Now shape the wires numbered 2 and 4 around the bead. Wires 2, 3 and 4 will join at the other end of the bead. Get ready with a 6cm of thin wires.
Step 9
Cut off excess wires once the 2nd joint is completed. Wrap the thin wires around the joint 4 times.
Step 10
Now thread in another 1.5cm round bead through wire numbered 5.
Step 11
Shape the wires around the bead. Wires numbered 3, 4, 5 & 6 will be joining at the end of the bead. Get a 6cm thin wires to wrap around the wires 4 times. You have completed wrapping the 3rd joint.
Step 12
Now thread in the 3rd 1.5cm round bead through the wire numbered 3.
I offer the tutorial in PDF that provide clearer intruction on the respective picture. If you are interested to buy the eBook at USD3, contact me at diyjewelryclub at gmail dot com.
Part 3 to be continued in my next post.
Don't miss a post! Subscribe to Handmade Jewelry Club by Email FREE
Feel free to distribute the content of the post. However, you must give credit by providing a link back to http://www.handmade-jewelry-club.com/
